Course fees and enrollment
- Duration
- 2 months
- Total course fee
- PKR 80,000
- Month 1: PKR 40,000
- Month 2: PKR 40,000
Join at any time. Theory and individual practical classes alternate.
Course at a glance
- Who it is for
- Beginners and junior technicians
- Before you start
- Start with safe handling, parts testing and basic hardware skills.
- At the workbench
- Safe teardown, parts testing, electrical measurements and first soldering exercises.
- Location
- Rawalpindi · in-person training
Course outline
Level 1 and Level 2 are taught together. The lists below cover the Level 2 iPhone and Android topics. The sample study plan shows foundational bench exercises.
iPhone hardware and board repair
- iPhone 6 through iPhone 8 Plus repair
- NAND programming
- Battery boost
- Baseband board repair (theory and practical)
- Touch faults (theory and practical)
- Charging faults (theory and practical)
- Wi-Fi and Bluetooth faults (theory and practical)
- Full shorts (theory and practical)
- Half shorts (theory and practical)
- Sound IC (theory and practical)
- Micro-jumper work (practical)
- NAND upgrade programming (practical)
- Stuck-on-logo faults (theory)
- Restarting faults (theory)
- Schematic diagrams and bitmap layouts (theory)
Android hardware and board repair
- Using a DC power supply (practical)
- Using a multimeter (practical)
- Reading schematic diagrams
- Identifying circuit line names (theory)
- Stacked CPU reballing (practical)
- eMMC reballing (practical)
- Power IC reballing (practical)
- Micro-jumper work (practical)
- Charging jack replacement (practical)
- Long jack replacement (practical)
- Full short diagnosis and repair (practical)
- Half short diagnosis and repair (theory and practical)
- Network faults (theory)
- Sound IC repair (theory)
- Backlight IC repair (theory)
- Graphics IC repair (theory)
Sample study plan
See examples of bench exercises and skills checks.
Bench setup and safe handling
Start with ESD protection, battery precautions, screw organization, flex cables and connector handling.
- Bench exercise
- Disassemble and reassemble a training phone, keeping track of screws and connector locations.
- Skills check
- Inspect the assembly and verify the original functions before signing off.
Basic electronics and measurements
Identify resistors, capacitors, inductors and diodes. Learn voltage, current, resistance, ground and the difference between continuity and diode-mode readings.
- Bench exercise
- Record readings on a reference board and observe the current pattern on a DC bench supply.
- Skills check
- Choose the correct meter mode and explain what the reading can tell you about the fault.
Parts testing and replacement
Inspect the battery, screen, charging assembly, audio parts and flex cables. Learn when a known-good part can help confirm a diagnosis.
- Bench exercise
- Separate a display or charging-accessory issue from a connector or board issue.
- Skills check
- Show the evidence that supports swapping a part or moving to board-level diagnosis.
Soldering and board fundamentals
Locate pads, traces and connectors under magnification. Compare good joints with bridges and damaged pads.
- Bench exercise
- Tack and inspect a connection, then repeat the exercise on a spare board.
- Skills check
- Inspect the joint under a microscope and verify continuity where applicable.
Guided fault diagnosis and repair checks
Follow a consistent sequence for charging, display, touch and audio complaints. Record symptoms, checks, findings and the repair decision.
- Bench exercise
- Work through one assigned fault and build a checklist for the functions affected by the repair.
- Skills check
- Explain the evidence and verify the repair with a functional test.
Sample practical exercises
iPhone does not charge
Compare with a known-good charger and cable. Inspect the port and decide which check will help separate an accessory or assembly issue from a board fault.
What to document Record the accessory used, visible condition, charging response and the basis for the next check.
No display after assembly
Check whether the phone shows signs of booting, inspect the connectors and compare with a known-good display where appropriate.
What to document Explain whether the evidence points to the screen, connector or board-side display circuit.
Suggested final practical
Diagnose one common fault and hand in a short bench report with the symptom, measurements, repair decision and post-repair test results.