Course fees and enrollment
- Duration
- 1 month
- Total course fee
- PKR 50,000
Join at any time. Theory and individual practical classes alternate.
Course at a glance
- Who it is for
- Working repair technicians with soldering and measurement experience
- Before you start
- Be comfortable with safe board handling, multimeter readings and basic soldering.
- At the workbench
- Schematics, current-draw interpretation, trace and pad work, and chip-level practice.
- Location
- Rawalpindi · in-person training
Course outline
Level 3 focuses on advanced iPhone repair for iPhone X and later models.
Power, charging and startup faults
- Battery boost
- Charging faults (theory and practical)
- Full shorts (theory and practical)
- Half shorts (theory and practical)
- Stuck-on-logo faults (theory)
- iPhone X-series restarting faults (theory)
Face ID, touch and hardware repair
- Face ID hardware repair on iPhone X and later models
- Touch faults (theory and practical)
- Front FPC connector repair (theory and practical)
- Speaker repair (practical)
- Back glass replacement (practical)
- Sound IC (theory and practical)
NAND, connectivity and IC rework
- NAND programming
- NAND upgrade programming (practical)
- Baseband board repair (theory and practical)
- Wi-Fi and Bluetooth faults (theory and practical)
- Reballing on iPhone X and later models
- Micro-jumper work (practical)
Schematics and professional tools
- Schematic diagrams and bitmap layouts (theory)
- Reading and writing EEPROM data with a JC programmer on repair boards (practical)
- Using professional repair tools
Sample study plan
See examples of bench exercises and skills checks.
Schematic and boardview workflow
Identify circuit blocks, nets and checkpoints in model-specific schematics. Connect each measurement to its physical board location.
- Bench exercise
- Map a charging or power path and prepare a measurement table using a known-good reference where available.
- Skills check
- Locate the correct test point and explain how the reading narrows the search.
Power, charging and boot diagnosis
Study power sequencing, abnormal current draw, suspected shorts and charging faults. Compare repeatable measurements and use startup symptoms or available panic logs to guide checks.
- Bench exercise
- Work through a no-power or restart scenario and choose the next measurement before considering rework.
- Skills check
- Support the next action with readings and identify how to verify it.
Microsoldering, connectors and pad repair
Assess damaged pads, traces and connectors. Compare part replacement, pad reconstruction and micro-jumpers on appropriate training boards.
- Bench exercise
- Restore a practice connection and inspect the surrounding components under magnification.
- Skills check
- Verify the intended electrical path and check adjacent connections for bridges.
IC rework and stacked-board handling
Introduce IC removal, pad inspection, reballing and refitting. Discuss model-specific construction and the risks involved in stacked-board work.
- Bench exercise
- Inspect and document alignment, pad condition and surrounding components during a supervised rework exercise.
- Skills check
- Define which circuit checks should pass before the board goes back into the phone.
Subsystem faults and case documentation
Trace display, touch and audio faults. Introduce how storage and baseband symptoms fit into a broader diagnostic workflow.
- Bench exercise
- Produce a fault report that connects the symptom to schematic references, bench readings and the repair decision.
- Skills check
- Verify the target function and check related functions for regressions.
Sample practical exercises
No power
Start with a training board that shows no startup response. Compare current draw and board measurements with a suitable reference, then decide which circuit to investigate first.
What to document Submit the model and board reference, the measured points, the reason for each check and the startup tests you would use to validate a repair.
See the sample lesson ↗Charging fault
Check the external charging path, identify the relevant connector and power path in the schematic, and compare your readings before deciding on rework.
What to document Record the charging response and verify the affected functions after the proposed repair.
Boot loop
Record when the restart occurs. Compare available symptoms, logs and measurements to choose a circuit-level check.
What to document Show why that check is relevant and specify what stable startup would look like on the bench.
Suggested final practical
Complete one logic-board case report. Include a symptom, schematic reference, measurements, a justified repair decision and functional verification.